Overview for MI Cylinder
MI Mini Cylinder, front and rear cover with fixed anti-collision pad, can reduce the reversing impact of the cylinder; a variety of back cover forms, so that the installation of the cylinder more convenient; The front and rear cover and stainless steel are riveted with roller pack structure, and the connection is reliable; Stainless steel piston rod and cylinder body make the cylinder adapt to the general corrosive working environment; A variety of MI Cylinder and cylinder installation accessories are available for customers to choose.
Installation and use for MI Cylinder
When the load changes, the MI Stainless Steel Cylinder with sufficient output power is selected. Under high temperature or corrosive conditions, the corresponding high temperature or corrosive cylinder should be used.
In the case of high humidity, dust, or water droplets, oil dust, welding slag, the cylinder should take necessary protective measures.
Before the MI Cylinder is connected to the pipeline, the dirt in the pipeline must be removed to prevent debris from entering the cylinder.
MI stainless steel mini cylinders are allowed to use after the working medium should be filtered by the filter of 40μm or more.
In the low temperature environment, anti-freezing measures should be taken to prevent the water in the system from freezing.
Before use, it should be tested in no-load operation. Before operation, the buffer should be reduced and gradually relaxed, so as to avoid excessive impact and damage to the cylinder.
In order to maintain the normal operation and prolong the service life of the cylinder, the cylinder should avoid the lateral load as far as possible.
After MI Cylinder removed is not used for a long time, surface rust prevention should be paid attention, and dust inlet and outlet should be added to prevent dust blockage.
